【映画】「アリー スター誕生」を観てきました【感想】
Lady GAGA主演の映画「アリー スター誕生」の感想
Lady GAGA主演で話題の映画「アリー スター誕生」
リリコのCMを見て思わず観たくなり
この週末観に行ってきました。
あらすじ
歌の才能を見いだされた主人公がスターダムを駆け上がっていく姿を描き、1937年の「スタア誕生」を皮切りに、これまでも何度か映画化されてきた物語を、新たにブラッドリー・クーパー監督&レディー・ガガ主演で描く。音楽業界でスターになることを夢見ながらも、自分に自信がなく、周囲からは容姿も否定されるアリーは、小さなバーで細々と歌いながら日々を過ごしていた。そんな彼女はある日、世界的ロックスターのジャクソンに見いだされ、等身大の自分のままでショービジネスの世界に飛び込んでいくが……。世界的歌姫のガガが映画初主演でアリー役を熱演。もともとはクリント・イーストウッドが映画化する予定で進められていた企画で、「アメリカン・スナイパー」でイーストウッドとタッグを組んだクーパーが初監督作としてメガホンをとり、ジャクソン役でガガとともに主演も果たした。
「アリー スター誕生」の感想
先日、同系統の映画「ボヘミアンラプソディー」を観て
ものすごく感動しました。
【映画】「ボヘミアンラプソディー」を観てきました【感想】 - プログラミングと旅と映画の日々
今回の映画も本物の歌手が出ていて、
しかも世界的なヒット歌手のレディーガガが出ているとあって
期待しまくり映画館に足を運びました。
まず、映画が始まって少ししてすぐ
1番の見所がありました。
歌声には絶対の自信があるものの、周りより鼻が高いからという理由で
ルックス面でなかなか契約がうまく行かず、アリーはくすぶっていました。
そこに、歌手のジャクソンが現れます。
そして、ジャクソンのライブにアリーが観に行ったところ
ジャクソンに連れられて、アリーはステージに上がります。
ジャクソンは嫌がるアリーを横目にアリーの曲を歌い始めます。
そこにアリーも参戦!!
圧倒的な歌声に観客も湧きます。
このシーンが圧巻で、鳥肌ものでした。
ただ、この最高のシーンが映画のかなり序盤であるので
その後エンディングまで少しだれます。
ただ、エンディングの追悼ライブがこれまた圧巻。
歌詞に込められた想いや、ジャクソンの気持ちを思うと
ただただ泣けます。
ジャクソンがアルコールやドラッグに溺れる様を
映画の中盤でひたすら描いたからこそ伝わる切なさ。
なかなかの構成です。
レディーガガという圧倒的な歌唱力・演技力を持ったスターだからこそ
この映画は映えたのでしょう。
家に帰ってからずっとyoutubeでレディーガガのダンナ追悼ライブの曲を聴いていました。
関連
【映画】「ボヘミアンラプソディー」を観てきました【感想】
Queenのフレディーの映画「ボヘミアンラプソディー」の感想
Queenを知らない若い世代にも人気で話題の映画
「ボヘミアンラプソディー」を観てきました。
ボヘミアンラプソディーのあらすじ
世界的人気ロックバンド「クイーン」のボーカルで、1991年に45歳の若さでこの世を去ったフレディ・マーキュリーを描いた伝記ドラマ。クイーンの現メンバーであるブライアン・メイとロジャー・テイラーが音楽総指揮を手がけ、劇中の楽曲には主にフレディ自身の歌声を使用。「ボヘミアン・ラプソディ」「ウィ・ウィル・ロック・ユー」といった名曲誕生の瞬間や、20世紀最大のチャリティコンサート「ライブ・エイド」での圧巻のパフォーマンスといった音楽史に残る伝説の数々を再現するとともに、華やかな活躍の裏にあった知られざるストーリーを描き出していく。
正直CMをみた限りではQueen興味ないし、みなくていいかな。。
って思っていました。
ただあまりにも評判がいいと耳にするので
週末にトーホーシネマズ六本木までみに行ってきました。
ボヘミアンラプソディーの感想
まず、結論からいうと最高の映画でした。
ライブをみているような興奮もありながら、フレディーの物語に感動して泣けました。
お父さんが、
フレディーに昔から「善き考え、善き言葉、善き行い」をしろと執拗に言っていました。
フレディーはそれを言われて「それで良いことあったの?」と
舐めきった態度をとります。
しかし、Queenとして売れて、最後には世界最大のチャリティーライブイベントである
ライブエイドに出演します。
そのことを父に伝え、「ライブエイドの出演者は誰も出演料を取らない。善き考え、善き言葉、善き行いだ」
と父に良い放ち
抱きしめ合う姿が最高でした。
何よりライブの描写がかっこよすぎる映画でした。
彼がいきている内に彼の生ライブがみたかった...
【Docker】AWSにDocker hostを作成する方法【入門】
AWSにDocker hostを作成する方法
AWSにDocker hostを作成し、管理する方法についてみていきます!
AWSを操作するため、AWSの認証情報を取得
まずはAWSのウェブ画面にログインします。
左上のサービス>セキュリティ、 アイデンティティ、 コンプライアンス>I AM
をクリックします。
左のメニューからユーザーを選択
ユーザーを追加をクリック
ここで任意のユーザー名を入れ、プログラムによるアクセスにチェックを入れます!
そして次のステップへ!!
既存のポリシーを直接アタッチをクリック!
Administrator Accessをチェックして
次のステップへをクリック!
確認して問題なければそのままユーザーを作成をクリックしましょう!
ユーザーが作成できました!
アクセスキーはAWSにアクセスする際の鍵となります。
それではこれらのキーをPCに設定しましょう!
AWSの認証情報をPCに設定
キー情報はdocker-machineコマンドでも設定できます。
ただ、毎回入力するのはめんどいのでhomeディレクトリ配下にAWSディレクトリを用意してここに設定を入れておきます。
$ mkdir ~/.aws
$ vim ~/.aws/credencial $ cat ~/.aws/credencial [default] aws_access_key_id = XXX aws_secret_access_key = XXX
XXXは先ほどのAWSの画面上に表示された値を入れましょう!
AWS EC2インスタンスをdocker-machineで作成
まずはウェブUI上でインスタンスが存在していないことを確認します。
ではコマンドからEC2インスタンスを作成してみます!
$ docker-machine create --driver amazonec2 --amazonec2-open-port 8000 --amazonec2-region ap-northeast-1 aws-sandbox
起動したインスタンスの8000ポートを外部に公開します。
regionには東京リージョンを指定し
hostにはaws-sandboxという名前を指定しています。
では実行します。
$ docker-machine create --driver amazonec2 --amazonec2-open-port 8000 --amazonec2-region ap-northeast-1 aws-sandbox Running pre-create checks... Creating machine... (aws-sandbox) Launching instance... Waiting for machine to be running, this may take a few minutes... Detecting operating system of created instance... Waiting for SSH to be available... Detecting the provisioner... Provisioning with ubuntu(systemd)... Installing Docker... Copying certs to the local machine directory... Copying certs to the remote machine... Setting Docker configuration on the remote daemon... Checking connection to Docker... Docker is up and running! To see how to connect your Docker Client to the Docker Engine running on this virtual machine, run: docker-machine env aws-sandbox
インスタンスが作成されました!
ではコンテナを起動してみましょう
まず操作対象のhostを指定します。
docker-machineで起動したhostを指定するときと同じで、以下のコマンドでhostを指定します。
$ eval $(docker-machine env aws-sandbox)
では、docker run コマンドでコンテナを起動します。
hello-worldコンテナでやってみます。
$ docker run -d -p 8000:80 --name webserver kitematic/hello-world-nginx Unable to find image 'kitematic/hello-world-nginx:latest' locally latest: Pulling from kitematic/hello-world-nginx 77c6c00e8b61: Pull complete 9b55a9cb10b3: Pull complete e6cdd97ba74d: Pull complete 7fecf1e9de6b: Pull complete 6b75f22d7bea: Pull complete e8e00fb8479f: Pull complete 69fad424364c: Pull complete b3ba6e76b671: Pull complete a956773dd508: Pull complete 26d2b0603932: Pull complete 3cdbb221209e: Pull complete a3ed95caeb02: Pull complete Digest: sha256:ec0ca6dcb034916784c988b4f2432716e2e92b995ac606e080c7a54b52b87066 Status: Downloaded newer image for kitematic/hello-world-nginx:latest e6def26304053e18a4db9eb8c41343b33281264960d6ea9b72b9fdeec5f1ad94
それではipを確認して、ブラウザからみてみましょう!
docker-machine ip aws-sandbox 13.231.242.178
ブラウザから確認すると正常にコンテナが起動していますね!
コンテナを止めちゃいましょう
$ docker-machine stop aws-sandbox Stopping "aws-sandbox"... Machine "aws-sandbox" was stopped.
最後にこのコンテナを削除します!
$ docker-machine rm aws-sandbox About to remove aws-sandbox WARNING: This action will delete both local reference and remote instance. Are you sure? (y/n): y Successfully removed aws-sandbox
【Docker】Docker machineを使用したDocker hostの作成方法【入門】
Docker machineを使用したDocker hostの作成
docker hostの確認コマンド
$ docker-machine ls
試しに実行すると起動中のhostがないことがわかります。
$ docker-machine ls NAME ACTIVE DRIVER STATE URL SWARM DOCKER ERRORS
docker hostの起動コマンド
以下は仮想化のdriverにvirtualboxを使用してdefaultという名前でhostを作成
$ docker-machine create --driver virtualbox default
コマンドを実行して見ます。
hodzumitakanori-no-MacBook-Air:DockerAutomatedBuild hodzumitakanori$ docker-machine create --driver virtualbox default Creating CA: /Users/hodzumitakanori/.docker/machine/certs/ca.pem Creating client certificate: /Users/hodzumitakanori/.docker/machine/certs/cert.pem Running pre-create checks... (default) Image cache directory does not exist, creating it at /Users/hodzumitakanori/.docker/machine/cache... (default) No default Boot2Docker ISO found locally, downloading the latest release... (default) Latest release for github.com/boot2docker/boot2docker is v18.09.0 (default) Downloading /Users/hodzumitakanori/.docker/machine/cache/boot2docker.iso from https://github.com/boot2docker/boot2docker/releases/download/v18.09.0/boot2docker.iso... (default) 0%....10%....20%....30%....40%....50%....60%....70%....80%....90%....100% Creating machine... (default) Unable to get the local Boot2Docker ISO version: Did not find prefix "-v" in version string (default) Default Boot2Docker ISO is out-of-date, downloading the latest release... (default) Latest release for github.com/boot2docker/boot2docker is v18.09.0 (default) Downloading /Users/hodzumitakanori/.docker/machine/cache/boot2docker.iso from https://github.com/boot2docker/boot2docker/releases/download/v18.09.0/boot2docker.iso... (default) 0%....10%....20%....30%....40%....50%....60%....70%....80%....90%....100% (default) Copying /Users/hodzumitakanori/.docker/machine/cache/boot2docker.iso to /Users/hodzumitakanori/.docker/machine/machines/default/boot2docker.iso... (default) Creating VirtualBox VM... (default) Creating SSH key... (default) Starting the VM... (default) Check network to re-create if needed... (default) Found a new host-only adapter: "vboxnet0" (default) Waiting for an IP... Waiting for machine to be running, this may take a few minutes... Detecting operating system of created instance... Waiting for SSH to be available... Detecting the provisioner... Provisioning with boot2docker... Copying certs to the local machine directory... Copying certs to the remote machine... Setting Docker configuration on the remote daemon... Checking connection to Docker... Docker is up and running! To see how to connect your Docker Client to the Docker Engine running on this virtual machine, run: docker-machine env default
起動確認
$ docker-machine ls NAME ACTIVE DRIVER STATE URL SWARM DOCKER ERRORS default - virtualbox Running tcp://192.168.99.100:2376 v18.09.0
defaultの名前でdocker hostが起動しました!
hostが起動したので、このhostに接続する方法を見ていきます!
こちらのコマンドで、捜査対象のdocker hostに接続するための設定が出力されます。
$ docker-machine env default
それでは実行してみます。
下に記載のコマンド(eval $(docker-machine env default))を記載することで、まとめて環境変数を設定できます。
$ docker-machine env default export DOCKER_TLS_VERIFY="1" export DOCKER_HOST="tcp://192.168.99.100:2376" export DOCKER_CERT_PATH="/Users/hodzumitakanori/.docker/machine/machines/default" export DOCKER_MACHINE_NAME="default" # Run this command to configure your shell: # eval $(docker-machine env default)
やってみます。
$ eval $(docker-machine env default)
これで設定できました。簡単ですね。
では、このhost上でhelloworldコンテナを起動してみましょう!!!
docker hostでhellowoldコンテナを起動
$ docker run hello-world Unable to find image 'hello-world:latest' locally latest: Pulling from library/hello-world d1725b59e92d: Pull complete Digest: sha256:0add3ace90ecb4adbf7777e9aacf18357296e799f81cabc9fde470971e499788 Status: Downloaded newer image for hello-world:latest Hello from Docker! This message shows that your installation appears to be working correctly. To generate this message, Docker took the following steps: 1. The Docker client contacted the Docker daemon. 2. The Docker daemon pulled the "hello-world" image from the Docker Hub. (amd64) 3. The Docker daemon created a new container from that image which runs the executable that produces the output you are currently reading. 4. The Docker daemon streamed that output to the Docker client, which sent it to your terminal. To try something more ambitious, you can run an Ubuntu container with: $ docker run -it ubuntu bash Share images, automate workflows, and more with a free Docker ID: https://hub.docker.com/ For more examples and ideas, visit: https://docs.docker.com/get-started/
実行できました!!
ではdefaultのhostにssh接続して、このhostでhello worldが実行されたことを
確認してみます。
$ docker-machine ssh default ( '>') /) TC (\ Core is distributed with ABSOLUTELY NO WARRANTY. (/-_--_-\) www.tinycorelinux.net
docker ps
psコマンドでprocessを確認すると
hello worldgが実行されたことがわかります。
docker@default:~$ docker ps -a CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 8741da52aca1 hello-world "/hello" 36 seconds ago Exited (0) 35 seconds ago amazing_keller docker@default:~$
docker hostとの接続を解除
defaultとの接続を解除しましょう!
先ほどコマンドで設定した環境変数を削除すればOKです。
$ docker-machine env -u unset DOCKER_TLS_VERIFY unset DOCKER_HOST unset DOCKER_CERT_PATH unset DOCKER_MACHINE_NAME # Run this command to configure your shell: # eval $(docker-machine env -u)
【Docker】githubへのビルドコンテキストのpushに伴うAutomated buildを実践【入門】
Automated buildを実践
前回の設定に基づき、githubにビルドコンテキストをpush
それに伴うAutomated buildを見ていきます。
githubへのビルドコンテキストのpush
まずは空のリポジトリにDockerfileを作成していきます。
適当なDockerfileを作成
$ cat Dockerfile FROM dockersamples/static-site ENV AUTHOR="takanori5"
これをgithubにpush して見ます。
$ git push origin HEAD Counting objects: 3, done. Delta compression using up to 4 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (3/3), 270 bytes | 0 bytes/s, done. Total 3 (delta 0), reused 0 (delta 0) remote: remote: Create a pull request for 'master' on GitHub by visiting: remote: https://github.com/takanorihozumi/DockerAutomatedBuild/pull/new/master remote: To https://github.com/takanorihozumi/DockerAutomatedBuild.git * [new branch] HEAD -> master
すると、もともと以下のような状態だったDockerhubのリポジトリに
以下のように追加されていることがわかります。
まだステータスがQueuedですね
しばらく待ちステータスがSuccessとなればビルド完了です。
試しにDockerhubからイメージを取得して見ます。
取得できました!
docker pull takanori5/dockerautomatedbuild Using default tag: latest latest: Pulling from takanori5/dockerautomatedbuild fdd5d7827f33: Already exists a3ed95caeb02: Already exists 716f7a5f3082: Already exists 7b10f03a0309: Already exists aff3ab7e9c39: Already exists Digest: sha256:29e35b7bdda590d8a3e6f78e22871e5aff1f90ce5bd6e52de2497313bb574617 Status: Downloaded newer image for takanori5/dockerautomatedbuild:latest
【Docker】Automated Build(自動build)の設定方法【入門】
DockerのAutomated Build(自動build)の設定方法
Automated Build(自動build)を設定していきます。
まずはgithubやbitbucketなどのホスティングサービスとリンク設定を行います。
githubとdockerhubをリンクする方法
まずはdocker hubにいきます
右上の
Create>Create Automated buildを選択します。
クリックすると、githubとリンクしていない場合は
以下のような画面が出ます。
ではLink accountsをクリックしましょう!!
githubとリンクしたい場合はlink githubをクリック!!
2つの選択肢が出現しました。
上はpublicとprivate両方のリポジトリに権限を与えるもの
下はpublicのみ参照権限を与えるものです。
特に理由がないなら推奨されている上の連携方法を選びましょう。
(githubのリポジトリを持っていない場合事前に用意しておきましょう!)
上の画面にてAuthorize dockerをクリックすれば連携完了となります。
簡単ですね!
続いてautomated buildの設定を行います。
Dockerhubのautomated buildの設定方法
右上のCreate>Create automated buildをクリックします
すると以下の画面が出ます。
create auto build githubをクリック
するとgithubのリポジトリが連携されており一覧表示されていますね。
設定したりリポジトリをクリック!
ここで設定を行うことで
設定したリポジトリに変更があった際にイメージを自動ビルドします。
入力値はとりあえずデフォルト値のままCreateをクリックします。
リポジトリが作成され、設定内容が表示されました。
簡単ですね。
webhookタブで設定を行うと、ビルドが行われた際に
設定した先に通知を行うことも可能です。
いいですね!